So, from any linux box, assuming Clonezilla-SysRescCD iso file is in your home directory, and your USB device name is sdc4, you just execute the commands:
umount /dev/sdc4
-dd if=~/clonezilla-sysresccd-full-mod-3.1.0.iso of=/dev/sdc4 bs=512
And that's it. Your usb device is ready to boot!!!
+Using the extra space [^]
++If your usb device is more than 400MB in size, the above command will leave the remaining space unused. To verify it, execute the command: +
+fdisk -l /dev/sdc
+ +You should get something similar to this:
+ + +
+Disk /dev/sdc: 1048 MB, 1048576000 bytes
+64 heads, 32 sectors/track, 1000 cylinders, total 2048000 sectors
+Units = sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk identifier: 0x77a5188f
+
+ Device Boot Start End Blocks Id System
+/dev/sdc1 * 1 384 393216 17 Hidden HPFS/NTFS
+
+As you can see, we are currently using 348 out of 1000 cylinders of the disk. The remaining disk space (~600MB) can still be used, executing the following commands (user input is displayed in magenta, comments are in brown): +
+ +
+fdisk /dev/sdc
+command (m for help): n (create new partition)
+command action
+ e extended
+ p primary partition (1-4)
+p
+partition number (1-4): 4 (create partition sdc4)
+first cylinder (385-1000, default 385):
+using default value 385
+last cylinder, +cylinders or +size{k,m,g} (385-1000, default 1000):
+using default value 1000
+
+command (m for help): p (display partition table)
+
+disk /dev/sdc: 1048 mb, 1048576000 bytes
+64 heads, 32 sectors/track, 1000 cylinders
+units = cylinders of 2048 * 512 = 1048576 bytes
+sector size (logical/physical): 512 bytes / 512 bytes
+i/o size (minimum/optimal): 512 bytes / 512 bytes
+disk identifier: 0x77a5188f
+
+ device boot start end blocks id system
+/dev/sdc1 * 1 384 393216 17 hidden hpfs/ntfs
+/dev/sdc4 385 1000 630784 83 linux
+
+
+command (m for help): t (change partition type)
+partition number (1-4): 4
+hex code (type l to list codes): b
+changed system type of partition 4 to b (w95 fat32)
+
+command (m for help): p (display partition table)
+
+disk /dev/sdc: 1048 mb, 1048576000 bytes
+64 heads, 32 sectors/track, 1000 cylinders
+units = cylinders of 2048 * 512 = 1048576 bytes
+sector size (logical/physical): 512 bytes / 512 bytes
+i/o size (minimum/optimal): 512 bytes / 512 bytes
+disk identifier: 0x77a5188f
+
+ device boot start end blocks id system
+/dev/sdc1 * 1 384 393216 17 hidden hpfs/ntfs
+/dev/sdc4 385 1000 630784 b w95 fat32
+
+command (m for help): w (write partition table to disk and exit)
+The partition table has been altered!
+
+Calling ioctl() to re-read partition table.
+
+WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
+The kernel still uses the old table. The new table will be used at
+the next reboot or after you run partprobe(8) or kpartx(8)
+Syncing disks.
+
+At this point you should disconnect and reconnect your usb device. When it's recognised, you can format the partition you've just created +
+ ++mkdosfs -F 32 /dev/sdc4 +
+ ++The partition is now ready for use!!! +
Installing the "hard" way [^]
@@ -243,16 +334,15 @@fdisk -l /dev/sdc
You should get something similar to this:
-Disk /dev/sdc: 1031 MB, 1031798272 bytes | |||||||
64 heads, 32 sectors/track, 983 cylinders | |||||||
Units = cylinders of 2048 * 512 = 1048576 bytes | |||||||
Device | Boot | Start | End | Blocks | Id | System | |
/dev/sdc4 | * | 1 | 983 | 1006576 | 6 | FAT16 | - |
+Disk /dev/sdc: 1031 MB, 1031798272 bytes
+64 heads, 32 sectors/track, 983 cylinders
+Units = cylinders of 2048 * 512 = 1048576 bytes
+
+ Device Boot Start End Blocks Id System
+/dev/sdc4 * 1 983 1006576 6 FAT16
+
If the partition is not active (no astrisk), execute:
fdisk /dev/sdc
@@ -278,9 +368,13 @@ In this case you will have to format your USB disk.If you are using linux to perform the installation, execute the command: +
mkdosfs -F 16 /dev/sdc4
+to create a FAT16 file system, or
+mkdosfs -F 32 /dev/sdc4
+to create a FAT32 file system.
When you are done go back to section "Installation from Linux".
@@ -358,7 +452,7 @@