/[hydra]/hydra/boa.conf
ViewVC logotype

Contents of /hydra/boa.conf

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1.1.1.1 - (show annotations) (vendor branch)
Sat Sep 21 13:53:12 2002 UTC (18 years, 8 months ago) by nmav
Branch: boas
CVS Tags: start
Changes since 1.1: +0 -0 lines
Imported sources

1 # Boa v0.94 configuration file
2 # File format has not changed from 0.93
3 # File format has changed little from 0.92
4 # version changes are noted in the comments
5 #
6 # The Boa configuration file is parsed with a lex/yacc or flex/bison
7 # generated parser. If it reports an error, the line number will be
8 # provided; it should be easy to spot. The syntax of each of these
9 # rules is very simple, and they can occur in any order. Where possible
10 # these directives mimic those of NCSA httpd 1.3; I saw no reason to
11 # introduce gratuitous differences.
12
13 # $Id: boa.conf,v 1.25 2002/03/22 04:33:09 jnelson Exp $
14
15 # The "ServerRoot" is not in this configuration file. It can be compiled
16 # into the server (see defines.h) or specified on the command line with
17 # the -c option, for example:
18 #
19 # boa -c /usr/local/boa
20
21 # number of threads to spawn
22 Threads 4
23
24 # maximum connections (per thread)
25 #MaxConnections 0
26
27 # non zero enables SSL support
28 # 1: only SSL support
29 # 2: both SSL and non SSL ports
30 SSL 2
31
32 # The port where the SSL server will listen on
33 SSLPort 4443
34
35 # read the certificate from
36 SSLCertificate cert.pem
37
38 # read the private key from
39 SSLKey key.pem
40
41 # Number of sessions to cache. This is to support session resuming.
42 # Set to 0 to disable.
43 SSLSessionCache 40
44
45 # After this time (in seconds) has passed, the stored SSL sessions
46 # will be expired, and will not be resumed.
47 SSLSessionTimeout 3600 #one hour
48
49 # Set the prime bits used in Diffie Hellman authentication. The parameters
50 # are only generated if the DHE ciphersuites are enabled.
51 # Value should be one of 768, 1024, 2048, 4096
52 SSLDHBits 768
53
54 # The period when the generated parameters are valid. After that period
55 # boa will regenerate parameters.
56 SSLParamsRefresh 172800 #two days
57
58 # A comma separated list of the SSL ciphers. Valid selections are:
59 # ARCFOUR-128, ARCFOUR-40, 3DES, AES
60 # Note that ARCFOUR-40 is a weak algorithm.
61 SSLCiphers "AES, 3DES, ARCFOUR-128, ARCFOUR-40"
62
63 # A comma separated list of the SSL key exchange methods. Valid selections
64 # are: RSA, DHE-RSA, DHE-DSS, RSA-EXPORT
65 # Note that RSA-EXPORT is a weak algorithm.
66 SSLKeyExchangeAlgorithms "RSA, RSA-EXPORT"
67
68 # A comma separated list of the SSL MAC algorithms. Valid selections
69 # are: MD5, SHA1
70 SSLMACAlgorithms "SHA1, MD5"
71
72 # A comma separated list of the SSL compression methods. Valid selections
73 # are: NULL
74 SSLCompressionMethods "NULL"
75
76 # A comma separated list of the SSL protocol versions. Valid selections
77 # are: TLS1.0 and SSL3.0
78 SSLProtocols "TLS1.0, SSL3.0"
79
80 # Port: The port Boa runs on. The default port for http servers is 80.
81 # If it is less than 1024, the server must be started as root.
82
83 Port 80
84
85 # Listen: the Internet address to bind(2) to. If you leave it out,
86 # it takes the behavior before 0.93.17.2, which is to bind to all
87 # addresses (INADDR_ANY). You only get one "Listen" directive,
88 # if you want service on multiple IP addresses, you have three choices:
89 # 1. Run boa without a "Listen" directive
90 # a. All addresses are treated the same; makes sense if the addresses
91 # are localhost, ppp, and eth0.
92 # b. Use the VirtualHost directive below to point requests to different
93 # files. Should be good for a very large number of addresses (web
94 # hosting clients).
95 # 2. Run one copy of boa per IP address, each has its own configuration
96 # with a "Listen" directive. No big deal up to a few tens of addresses.
97 # Nice separation between clients.
98 # The name you provide gets run through inet_aton(3), so you have to use dotted
99 # quad notation. This configuration is too important to trust some DNS.
100
101 #Listen 192.68.0.5
102
103 # User: The name or UID the server should run as.
104 # Group: The group name or GID the server should run as.
105
106 User nobody
107 Group nogroup
108
109 # ServerAdmin: The email address where server problems should be sent.
110 # Note: this is not currently used, except as an environment variable
111 # for CGIs.
112
113 #ServerAdmin root@localhost
114
115 # ErrorLog: The location of the error log file. If this does not start
116 # with /, it is considered relative to the server root.
117 # Set to /dev/null if you don't want errors logged.
118 # If unset, defaults to /dev/stderr
119
120 ErrorLog /var/log/boa/error_log
121 # Please NOTE: Sending the logs to a pipe ('|'), as shown below,
122 # is somewhat experimental and might fail under heavy load.
123 # "Usual libc implementations of printf will stall the whole
124 # process if the receiving end of a pipe stops reading."
125 #ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/boa/error_log /var/log/boa/error-%Y%m%d.log"
126
127 # AccessLog: The location of the access log file. If this does not
128 # start with /, it is considered relative to the server root.
129 # Comment out or set to /dev/null (less effective) to disable
130 # Access logging.
131
132 AccessLog /var/log/boa/access_log
133 # Please NOTE: Sending the logs to a pipe ('|'), as shown below,
134 # is somewhat experimental and might fail under heavy load.
135 # "Usual libc implementations of printf will stall the whole
136 # process if the receiving end of a pipe stops reading."
137 #AccessLog "|/usr/sbin/cronolog --symlink=/var/log/boa/access_log /var/log/boa/access-%Y%m%d.log"
138
139 # UseLocaltime: Logical switch. Uncomment to use localtime
140 # instead of UTC time
141 #UseLocaltime
142
143 # VerboseCGILogs: this is just a logical switch.
144 # It simply notes the start and stop times of cgis in the error log
145 # Comment out to disable.
146
147 #VerboseCGILogs
148
149 # ServerName: the name of this server that should be sent back to
150 # clients if different than that returned by gethostname + gethostbyname
151
152 #ServerName www.your.org.here
153
154 # VirtualHost: a logical switch.
155 # Comment out to disable.
156 # Given DocumentRoot /var/www, requests on interface 'A' or IP 'IP-A'
157 # become /var/www/IP-A.
158 # Example: http://localhost/ becomes /var/www/127.0.0.1
159 #
160 # Not used until version 0.93.17.2. This "feature" also breaks commonlog
161 # output rules, it prepends the interface number to each access_log line.
162 # You are expected to fix that problem with a postprocessing script.
163
164 #VirtualHost
165
166 # DocumentRoot: The root directory of the HTML documents.
167 # Comment out to disable server non user files.
168
169 DocumentRoot /var/www
170
171 # UserDir: The name of the directory which is appended onto a user's home
172 # directory if a ~user request is recieved.
173
174 UserDir public_html
175
176 # DirectoryIndex: Name of the file to use as a pre-written HTML
177 # directory index. Please MAKE AND USE THESE FILES. On the
178 # fly creation of directory indexes can be _slow_.
179 # Comment out to always use DirectoryMaker
180
181 DirectoryIndex index.html
182
183 # DirectoryMaker: Name of program used to create a directory listing.
184 # Comment out to disable directory listings. If both this and
185 # DirectoryIndex are commented out, accessing a directory will give
186 # an error (though accessing files in the directory are still ok).
187
188 DirectoryMaker /usr/lib/boa/boa_indexer
189
190 # DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
191 # has been commented out, the the on-the-fly indexing of Boa can be used
192 # to generate indexes of directories. Be warned that the output is
193 # extremely minimal and can cause delays when slow disks are used.
194 # Note: The DirectoryCache must be writable by the same user/group that
195 # Boa runs as.
196
197 # DirectoryCache /var/spool/boa/dircache
198
199 # KeepAliveMax: Number of KeepAlive requests to allow per connection
200 # Comment out, or set to 0 to disable keepalive processing
201
202 KeepAliveMax 1000
203
204 # KeepAliveTimeout: seconds to wait before keepalive connection times out
205
206 KeepAliveTimeout 10
207
208 # MimeTypes: This is the file that is used to generate mime type pairs
209 # and Content-Type fields for boa.
210 # Set to /dev/null if you do not want to load a mime types file.
211 # Do *not* comment out (better use AddType!)
212
213 MimeTypes /etc/mime.types
214
215 # DefaultType: MIME type used if the file extension is unknown, or there
216 # is no file extension.
217
218 DefaultType text/plain
219
220 # CGIPath: The value of the $PATH environment variable given to CGI progs.
221
222 CGIPath /bin:/usr/bin:/usr/local/bin
223
224 # SinglePostLimit: The maximum allowable number of bytes in
225 # a single POST. Default is normally 1MB.
226
227 # AddType: adds types without editing mime.types
228 # Example: AddType type extension [extension ...]
229
230 # Uncomment the next line if you want .cgi files to execute from anywhere
231 #AddType application/x-httpd-cgi cgi
232
233 # Redirect, Alias, and ScriptAlias all have the same semantics -- they
234 # match the beginning of a request and take appropriate action. Use
235 # Redirect for other servers, Alias for the same server, and ScriptAlias
236 # to enable directories for script execution.
237
238 # Redirect allows you to tell clients about documents which used to exist in
239 # your server's namespace, but do not anymore. This allows you to tell the
240 # clients where to look for the relocated document.
241 # Example: Redirect /bar http://elsewhere/feh/bar
242
243 # Aliases: Aliases one path to another.
244 # Example: Alias /path1/bar /path2/foo
245
246 Alias /doc /usr/doc
247
248 # ScriptAlias: Maps a virtual path to a directory for serving scripts
249 # Example: ScriptAlias /htbin/ /www/htbin/
250
251 ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
252

webmaster@linux.gr
ViewVC Help
Powered by ViewVC 1.1.26