hydra/examples/hydra.conf

# Hydra v0.0.2 configuration file
# File format has is similar but no identical to the format of Boa v0.94
# version changes are noted in the comments
#
# The Hydra configuration file is parsed with a lex/yacc or flex/bison
# generated parser.  If it reports an error, the line number will be
# provided; it should be easy to spot.  The syntax of each of these
# rules is very simple, and they can occur in any order.  Where possible
# these directives mimic those of NCSA httpd 1.3; I saw no reason to 
# introduce gratuitous differences.

# $Id: hydra.conf,v 1.3 2002/09/27 23:40:28 nmav Exp $

# The "ServerRoot" is not in this configuration file.  It can be compiled
# into the server (see defines.h) or specified on the command line with
# the -c option, for example:
#
# hydra -c /usr/local/hydra

# number of threads to spawn
Threads 5

# maximum connections (per thread)
#MaxConnections 0

# Port: The port Hydra runs on.  The default port for http servers is 80.
# If it is less than 1024, the server must be started as root.

Port 80

# Listen: the Internet address to bind(2) to.  If you leave it out,
# it takes the behavior before 0.93.17.2, which is to bind to all
# addresses (INADDR_ANY).  You only get one "Listen" directive,
# if you want service on multiple IP addresses, you have three choices:
#    1. Run hydra without a "Listen" directive
#       a. All addresses are treated the same; makes sense if the addresses
#          are localhost, ppp, and eth0.
#       b. Use the VirtualHost directive below to point requests to different
#          files.  Should be good for a very large number of addresses (web
#          hosting clients).
#    2. Run one copy of hydra per IP address, each has its own configuration
#       with a "Listen" directive.  No big deal up to a few tens of addresses.
#       Nice separation between clients.
# The name you provide gets run through inet_aton(3), so you have to use dotted
# quad notation.  This configuration is too important to trust some DNS.

#Listen 192.68.0.5

#  User: The name or UID the server should run as.
# Group: The group name or GID the server should run as.

User nobody
Group nogroup

# ServerAdmin: The email address where server problems should be sent.
# Note: this is not currently used, except as an environment variable
# for CGIs.

#ServerAdmin root@localhost

# ErrorLog: The location of the error log file. If this does not start
# with /, it is considered relative to the server root.
# Set to /dev/null if you don't want errors logged.
# If unset, defaults to /dev/stderr

ErrorLog /var/log/hydra/error_log
# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
#  is somewhat experimental and might fail under heavy load.
# "Usual libc implementations of printf will stall the whole
#  process if the receiving end of a pipe stops reading."
#ErrorLog "|/usr/sbin/cronolog --symlink=/var/log/hydra/error_log /var/log/hydra/error-%Y%m%d.log"

# AccessLog: The location of the access log file. If this does not
# start with /, it is considered relative to the server root.
# Comment out or set to /dev/null (less effective) to disable 
# Access logging.

AccessLog /var/log/hydra/access_log
# Please NOTE: Sending the logs to a pipe ('|'), as shown below,
#  is somewhat experimental and might fail under heavy load.
# "Usual libc implementations of printf will stall the whole
#  process if the receiving end of a pipe stops reading."
#AccessLog  "|/usr/sbin/cronolog --symlink=/var/log/hydra/access_log /var/log/hydra/access-%Y%m%d.log"

# UseLocaltime: Logical switch.  Uncomment to use localtime 
# instead of UTC time
#UseLocaltime

# VerboseCGILogs: this is just a logical switch.
#  It simply notes the start and stop times of cgis in the error log
# Comment out to disable.

#VerboseCGILogs

# ServerName: the name of this server that should be sent back to 
# clients if different than that returned by gethostname + gethostbyname 

#ServerName www.your.org.here

# VirtualHost: Setup any virtual hosts (host based)
# Comment out to disable.
# It needs to specify the HostName, the IP (use '*' if all),
# the DocumentRoot and the UserDir (if any).
# UserDir ist he name of the directory which is appended onto a user's home
# directory if a ~user request is recieved.
#
# Example: 
# VirtualHost www.dot.com * /var/www public_html
# VirtualHost www.dot.com 127.0.0.1 /var/www ""
#

#VirtualHost www.dot.com * /var/www ""

# DocumentRoot: The root directory of the HTML documents.
# Comment out to disable server non user files.
#
# Note that if VirtualHost is enabled, this will be the fallback
# for the clients that did not supply any host.

DocumentRoot /var/www

# DirectoryIndex: Name of the file to use as a pre-written HTML
# directory index.  Please MAKE AND USE THESE FILES.  On the
# fly creation of directory indexes can be _slow_.
# You can use more than one directory index by adding this
# directive several times.
# Comment out to always use DirectoryMaker

DirectoryIndex index.html

# DirectoryMaker: Name of program used to create a directory listing.
# Comment out to disable directory listings.  If both this and
# DirectoryIndex are commented out, accessing a directory will give
# an error (though accessing files in the directory are still ok).

DirectoryMaker /usr/lib/hydra/boa_indexer

# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
# has been commented out, the the on-the-fly indexing of Hydra can be used
# to generate indexes of directories. Be warned that the output is 
# extremely minimal and can cause delays when slow disks are used.
# Note: The DirectoryCache must be writable by the same user/group that 
# Hydra runs as.

# DirectoryCache /var/spool/hydra/dircache

# MaxFilesCache: Number of files to keep in file cache memory
# Set to 0 to disable file caching.

MaxFilesCache 256

# MaxFileSizeCache: The maximum size that a file should have in order to
# be added to the file cache.
# Comment out, to use the default value.

MaxFileSizeCache 131072

# KeepAliveMax: Number of KeepAlive requests to allow per connection
# Comment out, or set to 0 to disable keepalive processing

KeepAliveMax 1000

# KeepAliveTimeout: seconds to wait before keepalive connection times out

KeepAliveTimeout 10

# MimeTypes: This is the file that is used to generate mime type pairs
# and Content-Type fields for hydra.
# Set to /dev/null if you do not want to load a mime types file.
# Do *not* comment out (better use AddType!)

MimeTypes /etc/mime.types

# DefaultType: MIME type used if the file extension is unknown, or there
# is no file extension.

DefaultType text/plain

# CGIPath: The value of the $PATH environment variable given to CGI progs.

CGIPath /bin:/usr/bin:/usr/local/bin

# SinglePostLimit: The maximum allowable number of bytes in 
# a single POST.  Default is normally 1MB.

# AddType: adds types without editing mime.types
# Example: AddType type extension [extension ...]

# Uncomment the next line if you want .cgi files to execute from anywhere
#AddType application/x-httpd-cgi cgi


# Uncomment the following lines if you want .php files to execute from 
# anywhere, using the HIC (internally handled CGI). This is much faster
# than CGIs, it is handled internally by the server (no fork).

# Use this if you have enabled HIC support, and you have compiled
# PHP as a Hydra module. HIC 
#HICModule /usr/lib/libphp4.so "_php" "application/x-httpd-php"

# You may also need these:
#AddType application/x-httpd-php php
#AddType application/x-httpd-php phtml


# Redirect, Alias, and ScriptAlias all have the same semantics -- they
# match the beginning of a request and take appropriate action.  Use
# Redirect for other servers, Alias for the same server, and ScriptAlias
# to enable directories for script execution.

# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example: Redirect www.ourhost.com /bar http://elsewhere/feh/bar

# Aliases: Aliases one path to another.
# Example: Alias www.ourhost.com /path1/bar /absolute/path2/foo

#Alias www.localhost.com /doc /usr/doc

# ScriptAlias: Maps a virtual path to a directory for serving scripts
# Example: ScriptAlias www.ourhost.com /htbin/ /www/htbin/

#ScriptAlias www.localhost.com /cgi-bin/ /usr/lib/cgi-bin/

# non zero enables SSL support
# 1: only SSL support
# 2: both SSL and non SSL ports
SSL 0

# The port where the SSL server will listen on
SSLPort 4443

# read the certificate from
SSLCertificate cert.pem

# read the private key from
SSLKey key.pem

# Number of sessions to cache. This is to support session resuming.
# Set to 0 to disable.
SSLSessionCache 40

# After this time (in seconds) has passed, the stored SSL sessions
# will be expired, and will not be resumed.
SSLSessionTimeout 3600 #one hour

# Set the prime bits used in Diffie Hellman authentication. The parameters
# are only generated if the DHE ciphersuites are enabled.
# Value should be one of 768, 1024, 2048, 4096
SSLDHBits 768

# The period when the generated parameters are valid. After that period
# hydra will regenerate parameters.
SSLParamsRefresh 172800 #two days

# A comma separated list of the SSL ciphers. Valid selections are:
# ARCFOUR-128, ARCFOUR-40, 3DES, AES
# Note that ARCFOUR-40 is a weak algorithm.
SSLCiphers "AES, 3DES, ARCFOUR-128, ARCFOUR-40"

# A comma separated list of the SSL key exchange methods. Valid selections 
# are: RSA, DHE-RSA, DHE-DSS, RSA-EXPORT
# Note that RSA-EXPORT is a weak algorithm.
SSLKeyExchangeAlgorithms "RSA, RSA-EXPORT"

# A comma separated list of the SSL MAC algorithms. Valid selections 
# are: MD5, SHA1
SSLMACAlgorithms "SHA1, MD5"

# A comma separated list of the SSL compression methods. Valid selections 
# are: NULL
SSLCompressionMethods "NULL"

# A comma separated list of the SSL protocol versions. Valid selections 
# are: TLS1.0 and SSL3.0
SSLProtocols "TLS1.0, SSL3.0"
1	# Hydra v0.0.2 configuration file
2	# File format has is similar but no identical to the format of Boa v0.94
3	# version changes are noted in the comments
4	#
5	# The Hydra configuration file is parsed with a lex/yacc or flex/bison
6	# generated parser. If it reports an error, the line number will be
7	# provided; it should be easy to spot. The syntax of each of these
8	# rules is very simple, and they can occur in any order. Where possible
9	# these directives mimic those of NCSA httpd 1.3; I saw no reason to
10	# introduce gratuitous differences.
11
12	# $Id: hydra.conf,v 1.3 2002/09/27 23:40:28 nmav Exp $
13
14	# The "ServerRoot" is not in this configuration file. It can be compiled
15	# into the server (see defines.h) or specified on the command line with
16	# the -c option, for example:
17	#
18	# hydra -c /usr/local/hydra
19
20	# number of threads to spawn
21	Threads 5
22
23	# maximum connections (per thread)
24	#MaxConnections 0
25
26	# Port: The port Hydra runs on. The default port for http servers is 80.
27	# If it is less than 1024, the server must be started as root.
28
29	Port 80
30
31	# Listen: the Internet address to bind(2) to. If you leave it out,
32	# it takes the behavior before 0.93.17.2, which is to bind to all
33	# addresses (INADDR_ANY). You only get one "Listen" directive,
34	# if you want service on multiple IP addresses, you have three choices:
35	# 1. Run hydra without a "Listen" directive
36	# a. All addresses are treated the same; makes sense if the addresses
37	# are localhost, ppp, and eth0.
38	# b. Use the VirtualHost directive below to point requests to different
39	# files. Should be good for a very large number of addresses (web
40	# hosting clients).
41	# 2. Run one copy of hydra per IP address, each has its own configuration
42	# with a "Listen" directive. No big deal up to a few tens of addresses.
43	# Nice separation between clients.
44	# The name you provide gets run through inet_aton(3), so you have to use dotted
45	# quad notation. This configuration is too important to trust some DNS.
46
47	#Listen 192.68.0.5
48
49	# User: The name or UID the server should run as.
50	# Group: The group name or GID the server should run as.
51
52	User nobody
53	Group nogroup
54
55	# ServerAdmin: The email address where server problems should be sent.
56	# Note: this is not currently used, except as an environment variable
57	# for CGIs.
58
59	#ServerAdmin root@localhost
60
61	# ErrorLog: The location of the error log file. If this does not start
62	# with /, it is considered relative to the server root.
63	# Set to /dev/null if you don't want errors logged.
64	# If unset, defaults to /dev/stderr
65
66	ErrorLog /var/log/hydra/error_log
67	# Please NOTE: Sending the logs to a pipe ('\|'), as shown below,
68	# is somewhat experimental and might fail under heavy load.
69	# "Usual libc implementations of printf will stall the whole
70	# process if the receiving end of a pipe stops reading."
71	#ErrorLog "\|/usr/sbin/cronolog --symlink=/var/log/hydra/error_log /var/log/hydra/error-%Y%m%d.log"
72
73	# AccessLog: The location of the access log file. If this does not
74	# start with /, it is considered relative to the server root.
75	# Comment out or set to /dev/null (less effective) to disable
76	# Access logging.
77
78	AccessLog /var/log/hydra/access_log
79	# Please NOTE: Sending the logs to a pipe ('\|'), as shown below,
80	# is somewhat experimental and might fail under heavy load.
81	# "Usual libc implementations of printf will stall the whole
82	# process if the receiving end of a pipe stops reading."
83	#AccessLog "\|/usr/sbin/cronolog --symlink=/var/log/hydra/access_log /var/log/hydra/access-%Y%m%d.log"
84
85	# UseLocaltime: Logical switch. Uncomment to use localtime
86	# instead of UTC time
87	#UseLocaltime
88
89	# VerboseCGILogs: this is just a logical switch.
90	# It simply notes the start and stop times of cgis in the error log
91	# Comment out to disable.
92
93	#VerboseCGILogs
94
95	# ServerName: the name of this server that should be sent back to
96	# clients if different than that returned by gethostname + gethostbyname
97
98	#ServerName www.your.org.here
99
100	# VirtualHost: Setup any virtual hosts (host based)
101	# Comment out to disable.
102	# It needs to specify the HostName, the IP (use '*' if all),
103	# the DocumentRoot and the UserDir (if any).
104	# UserDir ist he name of the directory which is appended onto a user's home
105	# directory if a ~user request is recieved.
106	#
107	# Example:
108	# VirtualHost www.dot.com * /var/www public_html
109	# VirtualHost www.dot.com 127.0.0.1 /var/www ""
110	#
111
112	#VirtualHost www.dot.com * /var/www ""
113
114	# DocumentRoot: The root directory of the HTML documents.
115	# Comment out to disable server non user files.
116	#
117	# Note that if VirtualHost is enabled, this will be the fallback
118	# for the clients that did not supply any host.
119
120	DocumentRoot /var/www
121
122	# DirectoryIndex: Name of the file to use as a pre-written HTML
123	# directory index. Please MAKE AND USE THESE FILES. On the
124	# fly creation of directory indexes can be _slow_.
125	# You can use more than one directory index by adding this
126	# directive several times.
127	# Comment out to always use DirectoryMaker
128
129	DirectoryIndex index.html
130
131	# DirectoryMaker: Name of program used to create a directory listing.
132	# Comment out to disable directory listings. If both this and
133	# DirectoryIndex are commented out, accessing a directory will give
134	# an error (though accessing files in the directory are still ok).
135
136	DirectoryMaker /usr/lib/hydra/boa_indexer
137
138	# DirectoryCache: If DirectoryIndex doesn't exist, and DirectoryMaker
139	# has been commented out, the the on-the-fly indexing of Hydra can be used
140	# to generate indexes of directories. Be warned that the output is
141	# extremely minimal and can cause delays when slow disks are used.
142	# Note: The DirectoryCache must be writable by the same user/group that
143	# Hydra runs as.
144
145	# DirectoryCache /var/spool/hydra/dircache
146
147	# MaxFilesCache: Number of files to keep in file cache memory
148	# Set to 0 to disable file caching.
149
150	MaxFilesCache 256
151
152	# MaxFileSizeCache: The maximum size that a file should have in order to
153	# be added to the file cache.
154	# Comment out, to use the default value.
155
156	MaxFileSizeCache 131072
157
158	# KeepAliveMax: Number of KeepAlive requests to allow per connection
159	# Comment out, or set to 0 to disable keepalive processing
160
161	KeepAliveMax 1000
162
163	# KeepAliveTimeout: seconds to wait before keepalive connection times out
164
165	KeepAliveTimeout 10
166
167	# MimeTypes: This is the file that is used to generate mime type pairs
168	# and Content-Type fields for hydra.
169	# Set to /dev/null if you do not want to load a mime types file.
170	# Do not comment out (better use AddType!)
171
172	MimeTypes /etc/mime.types
173
174	# DefaultType: MIME type used if the file extension is unknown, or there
175	# is no file extension.
176
177	DefaultType text/plain
178
179	# CGIPath: The value of the $PATH environment variable given to CGI progs.
180
181	CGIPath /bin:/usr/bin:/usr/local/bin
182
183	# SinglePostLimit: The maximum allowable number of bytes in
184	# a single POST. Default is normally 1MB.
185
186	# AddType: adds types without editing mime.types
187	# Example: AddType type extension [extension ...]
188
189	# Uncomment the next line if you want .cgi files to execute from anywhere
190	#AddType application/x-httpd-cgi cgi
191
192
193	# Uncomment the following lines if you want .php files to execute from
194	# anywhere, using the HIC (internally handled CGI). This is much faster
195	# than CGIs, it is handled internally by the server (no fork).
196
197	# Use this if you have enabled HIC support, and you have compiled
198	# PHP as a Hydra module. HIC
199	#HICModule /usr/lib/libphp4.so "_php" "application/x-httpd-php"
200
201	# You may also need these:
202	#AddType application/x-httpd-php php
203	#AddType application/x-httpd-php phtml
204
205
206	# Redirect, Alias, and ScriptAlias all have the same semantics -- they
207	# match the beginning of a request and take appropriate action. Use
208	# Redirect for other servers, Alias for the same server, and ScriptAlias
209	# to enable directories for script execution.
210
211	# Redirect allows you to tell clients about documents which used to exist in
212	# your server's namespace, but do not anymore. This allows you to tell the
213	# clients where to look for the relocated document.
214	# Example: Redirect www.ourhost.com /bar http://elsewhere/feh/bar
215
216	# Aliases: Aliases one path to another.
217	# Example: Alias www.ourhost.com /path1/bar /absolute/path2/foo
218
219	#Alias www.localhost.com /doc /usr/doc
220
221	# ScriptAlias: Maps a virtual path to a directory for serving scripts
222	# Example: ScriptAlias www.ourhost.com /htbin/ /www/htbin/
223
224	#ScriptAlias www.localhost.com /cgi-bin/ /usr/lib/cgi-bin/
225
226	# non zero enables SSL support
227	# 1: only SSL support
228	# 2: both SSL and non SSL ports
229	SSL 0
230
231	# The port where the SSL server will listen on
232	SSLPort 4443
233
234	# read the certificate from
235	SSLCertificate cert.pem
236
237	# read the private key from
238	SSLKey key.pem
239
240	# Number of sessions to cache. This is to support session resuming.
241	# Set to 0 to disable.
242	SSLSessionCache 40
243
244	# After this time (in seconds) has passed, the stored SSL sessions
245	# will be expired, and will not be resumed.
246	SSLSessionTimeout 3600 #one hour
247
248	# Set the prime bits used in Diffie Hellman authentication. The parameters
249	# are only generated if the DHE ciphersuites are enabled.
250	# Value should be one of 768, 1024, 2048, 4096
251	SSLDHBits 768
252
253	# The period when the generated parameters are valid. After that period
254	# hydra will regenerate parameters.
255	SSLParamsRefresh 172800 #two days
256
257	# A comma separated list of the SSL ciphers. Valid selections are:
258	# ARCFOUR-128, ARCFOUR-40, 3DES, AES
259	# Note that ARCFOUR-40 is a weak algorithm.
260	SSLCiphers "AES, 3DES, ARCFOUR-128, ARCFOUR-40"
261
262	# A comma separated list of the SSL key exchange methods. Valid selections
263	# are: RSA, DHE-RSA, DHE-DSS, RSA-EXPORT
264	# Note that RSA-EXPORT is a weak algorithm.
265	SSLKeyExchangeAlgorithms "RSA, RSA-EXPORT"
266
267	# A comma separated list of the SSL MAC algorithms. Valid selections
268	# are: MD5, SHA1
269	SSLMACAlgorithms "SHA1, MD5"
270
271	# A comma separated list of the SSL compression methods. Valid selections
272	# are: NULL
273	SSLCompressionMethods "NULL"
274
275	# A comma separated list of the SSL protocol versions. Valid selections
276	# are: TLS1.0 and SSL3.0
277	SSLProtocols "TLS1.0, SSL3.0"